Selection – Zhizeng Fastener https://zhizengmetal.com 邯郸市致增紧固件制造有限公司 - Handan Zhizeng Fastener Manufacturing Co., Ltd. Fri, 11 Sep 2026 15:56:35 +0000 zh-Hans hourly 1 https://wordpress.org/?v=7.1.3 https://zhizengmetal.com/wp-content/uploads/2026/08/favicon-512-150x150.png Selection – Zhizeng Fastener https://zhizengmetal.com 32 32 Rail Channel Size and Bolt Specs That Fit https://zhizengmetal.com/en/rail-channel-size-and-bolt-specs-that-fit/ Fri, 11 Sep 2026 15:56:35 +0000 https://zhizengmetal.com/rail-channel-size-and-bolt-specs-that-fit/ Most PV rails use a T-slot or similar channel. Before you order mid/end clamps, confirm the channel opening and the bolt head that seats inside it.

Check three dimensions: channel opening, bolt diameter (often M8), and the clamp base that sits on the rail crown. A mismatch shows up as rocking clamps or incomplete bite on the module frame.

Finish: zinc-plated for inland sites; stainless or HDG where salt or industrial humidity is expected. Name the standard in the inquiry so we quote the right hardware kit.

Send us rail cross-section drawings or photos with a scale — we will match clamp + bolt + nut sets from stock or OEM.

]]> How to Choose Mid Clamps vs End Clamps https://zhizengmetal.com/en/mid-clamp-vs-end-clamp/ Fri, 21 Aug 2026 23:16:14 +0000 https://zhizengmetal.com/mid-clamp-vs-end-clamp-2/ PV modules sit on rails and are held by mid clamps and end clamps. The wrong clamp slows installation and can load the frame unevenly.

Mid clamps sit between two modules; end clamps finish the outer row. Slot width must match frame height, and the rail channel must match the slider or bolt.

Zhizeng supplies anodized aluminum clamps and can match module thickness. Request a quote or browse rail accessories and clamps.

]]>